HVAC & Plumbing Excellence in Lawton, OK

A 4-ton gas furnace was installed, including a condenser with a PSO rebate. A 12-inch return grill was added to enhance airflow. The entire system was meticulously sealed to prevent leaks, and pressure tests confirmed no air infiltration. A vacuum was pulled to 250, ensuring optimal performance. The condensate drain was insulated to prevent freezing and water leaks, and the system was tested for efficiency. The customer was satisfied with the installation, appreciating the attention to detail and the improved comfort of the system.

R22 system low on Freon causing the house to not cool down.

I began by inspecting the Rheem AC system to ensure it was safe and ready for service. I then located the service ports and attached the appropriate gauges to measure the refrigerant levels. After confirming the system was low on refrigerant, I added 2 pounds of R-22 refrigerant using a recovery machine to ensure precise measurement. Throughout the process, I monitored the system's pressure and temperature to maintain optimal performance. I checked for leaks and ensured all connections were secure. Finally, I tested the system to confirm it was cooling efficiently and documented the service for future reference.

Filter drier replacement due to refrigerant restriction.

Completed a comprehensive maintenance service on four rooftop package units. The process began with a thorough inspection of each unit to identify any potential issues. This included checking electrical connections, refrigerant levels, and the overall condition of the compressors and condensers. Filters were cleaned or replaced as necessary to ensure optimal performance. Lubrication of moving parts was performed to reduce wear and tear. System pressures were tested and adjusted to manufacturer specifications. Post-maintenance, each unit was tested for efficiency and cooling capacity. Documentation of the work performed was completed, detailing any repairs, parts replaced, and recommendations for future maintenance. The units were left in a fully operational state, ensuring reliable performanc

A thorough inspection of the Amana AC system was conducted, starting with a visual examination of the outdoor unit for any signs of wear, damage, or debris. The condenser coils were cleaned to ensure optimal heat transfer. The system's electrical connections were checked for tightness and integrity. Refrigerant levels were measured to confirm they were within the manufacturer's specifications. The air filter was inspected and replaced if necessary to maintain airflow efficiency. The thermostat settings were reviewed to ensure they were correctly configured. The system's drainage was checked for proper function to prevent water accumulation. Finally, the system's overall performance was tested to ensure it was operating efficiently and effectively.

Installed 3-ton gas furnace and completed PSO rebate requirements. Verified system pressures were holding and pulled vacuum on the refrigerant lines. Sealed all connections . Installed new filter base and new air filter. Checked operating pressures and added a small amount of refrigerant as needed. Cleaned and organized work area, removed debris, and picked up window unit. Verified outdoor unit is level and operating properly. Customer satisfied with completed installation.

Installed new Amana R-32 A/C and coil.

System not getting proper airflow due to improperly installed blower wheel.

Drain line clogged on 2005 Rheem system.

Conducted a comprehensive inspection of an Amana air conditioning system. Documented the inspection process by capturing high-quality images of the model and serial numbers to ensure accurate record-keeping and future reference. Evaluated the system's components, including the compressor, condenser, evaporator coils, and thermostat, to assess overall functionality and efficiency. Checked for any visible signs of wear, damage, or potential issues. Verified refrigerant levels and ensured the system was operating within manufacturer specifications. Provided detailed notes on the condition of each part and any recommendations for maintenance or repairs. This thorough inspection aimed to ensure the system's reliability and optimal performance.

Upon arrival, I conducted a thorough inspection of the HVAC system. The initial assessment revealed signs of a blown compressor, likely caused by a power surge from a recent storm. I carefully examined the electrical connections and components for any visible damage. After confirming the compressor failure, I explained the situation and the necessary steps to the client. I replaced the faulty compressor with a high-quality unit, ensuring optimal per

A comprehensive inspection of an R22 system was conducted to identify any potential leaks. The process began with a thorough visual examination of all components, including the evaporator, condenser, and connecting tubing. Specialized tools, such as an electronic leak detector, were employed to enhance the accuracy of the inspection. The detector was calibrated to detect even the smallest traces of refrigerant, ensuring no leak went unnoticed. Each section of the system was systematically checked, and any areas of concern were marked for further investigation. After identifying a suspected leak, the system was isolated, and a detailed analysis was performed to confirm the presence and location of the leak. Once confirmed, appropriate measures were taken to repair the leak and restore the system's integrity. The system was then re-tested to ensure no further leaks were present, and the refrigerant levels were balanced to maintain optimal performance.

Describe what you are working onrevent any electrical hazards. Using appropriate tools, I carefully removed the faulty capacitor from the system. I then inspected the surrounding components to ensure there was no additional damage. After confirming the area was safe, I installed a new, high-quality capacitor, ensuring all connections were secure and properly insulated. I tested the system to verify that the new capacitor was functioning correctly and that the HVAC system was operating efficiently. The system was then restored to full functionality, ensuring optimal performance and reliability.

A malfunctioning capacitor was identified as the r

Upon arrival, I conducted a thorough inspection of the HVAC system. I identified a leak in the evaporator coil, which was causing the cooling system to malfunction. I carefully assessed the extent of the damage and provided a detailed quote for replacing the coil. After receiving approval, I replaced the faulty coil and recharged the system with the appropriate amount of refrigerant. This ensured the system would cool effectively until the replacement coil was installed. Throughout the process, I maintained clear communication, ensuring the customer understood each step and the importance of the repairs. The system is now functioning optimally, providing reliable cooling.

A clogged condensate drain can cause significant issues with an air conditioning system, including reduced efficiency and potential water damage. I began by locating the condensate drain line, which is typically found near the indoor unit. I carefully removed any visible debris or blockages using a vacuum and a small brush. Next, I flushed the drain line with a mixture of water and a mild disinfectant to ensure no remaining contaminants were present. After confirming the drain was clear, I inspected the surrounding area for any signs of water leakage or damage. Finally, I tested the system to ensure it was functioning correctly and efficiently. This thorough process restored the Amana AC system's optimal performance and helped prevent future issues.

Service on a r22 Goodman ac system.

Conducted a comprehensive maintenance service on a Rheem heat pump, prioritizing its cooling efficiency. The maintenance began with a thorough inspection of the unit's components, including the compressor, condenser, and evaporator coils. I meticulously cleaned the condenser and evaporator coils to ensure optimal heat transfer and remove any accumulated debris. The system's refrigerant levels were checked and adjusted as necessary to maintain proper pressure. Additionally, I inspected and cleaned the air filter, ensuring it was free from dust and obstructions to facilitate smooth airflow. The thermostat settings were calibrated to ensure accurate temperature control. Finally, I tested the system's performance to confirm that the cooling function was operating efficiently and effectively. This maintenance service aimed to enhance the heat pump's longevity and energy efficiency.

Installed new 2.5-ton heat pump system. * Added new supply and return duct connections. * Ran new condensate drain line and installed a new P-trap. * Insulated condensate drain line. * Installed new auxiliary drain pan. * Installed new Unistrut support system. * Installed outdoor unit, including new electrical whip and pump-ups as required. * Applied Armaflex insulation to refrigerant lines. * Performed nitrogen pressure test at 400 PSIG for 30 minutes; system held pressure with no leaks detected. * Pulled system vacuum to 250 microns. * Reduced return duct serving the adjacent unit to a 12-inch return. * Installed customer-provided thermostat. * Checked airflow and verified proper system operation. * Tested heating and cooling functions to confirm correct performance. * Cleaned and removed all job-related debris from the work area.

Conducted a comprehensive maintenance service on a Goodman heat pump AC system. This included a thorough inspection of the unit's electrical components, refrigerant levels, and overall functionality. The maintenance process involved cleaning and replacing the air filters, lubricating the motor, and checking the thermostat settings. The condenser and evaporator coils were inspected for dirt and debris, and cleaned as necessary. The system's drainage was also checked to ensure proper water flow and prevent potential leaks. Performance tests were conducted to verify efficiency and correct operation. All work was completed with precision to ensure the system operates optimally and to extend its lifespan.

Electrical problems at Morada of Lawton

A customer reported a slow drain issue with their garbage disposal. Upon arrival, I conducted a thorough inspection to identify the root cause. The disposal was jammed, preventing proper drainage and operation. Using a specialized key, I carefully freed the disposal from the obstruction. After ensuring the disposal was clear, I tested it to confirm it was functioning smoothly and efficiently. The disposal was restored to optimal performance, alleviating the customer's concerns and ensuring their kitchen operates seamlessly.

Drain line cleaning and service on 2022 Amana Heat Pump

Gave an estimate on replacing an old defective water heater