HVAC & Plumbing Excellence in Fletcher, OK

4-Ton Heat Pump Installation Completed • Installed new 4-ton vertical heat pump air handler in the attic. • Installed sealed return plenum and new supply plenum. • Installed new Armaflex insulation on the refrigerant lines. • Installed new outdoor control wire. • Installed new condensate drain and tested for proper operation. Verified no stoppages or leaks. Outdoor Unit • Set outdoor condensing unit on new pump-up pads. • Installed new Armaflex insulation, new control wire, and Carflex conduit. • Pressure-tested the refrigerant system with nitrogen to 250 PSI. System held pressure for 35 minutes with no leaks detected. • Evacuated the system to below 500 microns and verified the vacuum held, confirming a dry, leak-free system.

Patriot Air Solutions recently completed a comprehensive upgrade of an outdated, inefficient heat-pump system. The project involved the meticulous removal of the old system, ensuring no damage to existing infrastructure. A state-of-the-art, high-efficiency heat-pump system was then installed, designed to significantly reduce energy consumption and operating costs. This new system features advanced technology and superior performance, ensuring optimal comfort and reliability. Rigorous testing was conducted to verify system functionality and efficiency. The installation was carried out by our top-rated service team, known for their expertise and commitment to excellence. The new system comes with comprehensive warranties, providing peace of mind and long-term value.

Conducted a comprehensive maintenance service on a 3-year-old Amana unit. The process began with a thorough inspection to identify any potential issues. The air filter was replaced to ensure optimal airflow and efficiency. The condenser and evaporator coils were cleaned to enhance heat exchange and cooling performance. Refrigerant levels were checked and adjusted as necessary. The system's electrical connections and components were inspected for wear and tear, with any faulty parts replaced. Lubrication was applied to moving parts to reduce friction and wear. The thermostat and control board were tested for proper functionality. Finally,

Conducted a comprehensive maintenance service on an American Standard heat pump, focusing on its cooling functionality. The process began with a thorough inspection of the unit, checking for any visible signs of wear or damage. I meticulously cleaned the condenser coils to ensure optimal heat transfer and efficiency. The air filter was replaced to enhance airflow and improve indoor air quality. I also inspected and cleaned the evaporator coils, ensuring they were free from dust and debris. The refrigerant levels were checked and adjusted as necessary to maintain proper pressure. Additionally, I examined the thermostat settings and ensured they were correctly configured for efficient cooling. The system's electrical connections were inspected for any loose or corroded wires, and all components were tested for proper operation. Finally, I provided the customer with a detailed report on the maintenance performed and offered recommendations for future care.

I was tasked with addressing an issue with a Rheem air conditioning system that was experiencing problems with its defrost function. Upon inspection, it was determined that the defrost board was malfunctioning, causing the system to fail in defrosting the evaporator coil properly. I carefully diagnosed the issue, ensuring that all other components were functioning correctly. After confirming the faulty defrost board, I replaced it with a new one. Post-replacement, I conducted thorough testing to ensure the defrost function operated correctly under various conditions. The system was restored to optimal performance, and the client was satisfied with the resolution of the defrost issue.

Completed a comprehensive preventive service operation (PSO) on a Rheem air conditioning unit. This involved a thorough inspection of all major components, including the compressor, condenser, and evaporator coils. I cleaned the condenser and evaporator coils to ensure optimal heat transfer and efficiency. The system's refrigerant levels were checked and adjusted as necessary. The air filter was replaced to improve indoor air quality and system performance. Additionally, I inspected and cleaned the drain pan and lines to prevent clogs and water damage. Electrical connections and controls were tested for proper operation. Lubricat

During the preventive seasonal maintenance (PSO) of a Lennox heat pump, I meticulously inspected the system's components. Upon examining the air coil, I discovered a filter that had been inadvertently drawn into the system. This filter, if left unchecked, could have severely compromised the heat pump's efficiency and longevity. I carefully removed the filter, ensuring no damage was done to the coil or other parts. Following the removal, I conducted a thorough cleaning of the coil to eliminate any residual debris. I also checked the refrigerant levels, electrical connections, and overall system functionality. The maintenance concluded with a comprehensive system test to ensure optimal performance. T

Making adjustments on new HVAC equipment.

A thorough inspection of the ductwork revealed several critical issues. The ducts were improperly sealed, leading to significant air leaks. Joints and connections were not adequately fastened, compromising the system's efficiency. Insulation was either missing or inadequately installed, resulting in heat loss and increased energy consumption. Additionally, the duct layout did not follow recommended design standards, causing uneven airflow distribution. Dust and debris were found within the ducts, indicating poor installation practices. Corrective measures were implemented to address these issues, ensuring the system operates efficiently and effectively.

A comprehensive overhaul of the home water supply system was executed. The existing piping was entirely replaced with new, high-quality materials to ensure durability and efficiency. Two new lavatory faucets were installed, featuring modern designs and advanced functionality for enhanced user experience. Additionally, a new shower valve was installed, providing improved water flow and temperature control. The work was completed with precision, ensuring all connections were secure and leak-free. The result is a reliable and efficient water supply system, ready for daily use.

Conducted a comprehensive maintenance service on a Rheem AC system, beginning with a thorough inspection of all components. Cleaned and inspected the condenser coils, ensuring optimal heat transfer efficiency. Checked and cleaned the air filter, enhancing indoor air quality. Lubricated the motor bearings and checked electrical connections for wear and safety. Tested the thermostat functionality and calibrated controls for precise temperature regulation. Evaluated refrigerant levels and pressure, addressing any leaks or deficiencies. Verified the condensate drain was clear and functioning properly to prevent water damage. Conducted a performance test to ensure the system operated efficiently and quietly. Provided detailed recommendations for future maintenance and potential upgrades to improve system longevity and performance.

Bathroom exhaust fan.

Condensate drain line repair.

Upon arrival, a thorough inspection revealed a severely obstructed drain, impeding proper drainage. Utilizing specialized tools and techniques, the clog was methodically dismantled and removed. A high-pressure water jet was employed to dislodge stubborn debris, while a flexible auger was used to navigate and clear the intricate pathways of the drain system. After ensuring the drain was entirely free of obstructions, a final inspection confirmed unobstructed flow. The drain was left in optimal condition, ready for regular use. This meticulous process restored functionality and prevented potential future issues.

Conducted a comprehensive maintenance service on a 4-year-old Bryant heat pump, with a primary focus on its cooling functionality. The maintenance began with a thorough inspection of the outdoor unit, ensuring all components were free from debris and properly secured. The condenser and evaporator coils were cleaned meticulously to remove any accumulated dirt or dust, enhancing heat transfer efficiency. The system's refrigerant levels were checked and adjusted as necessary to ensure optimal performance. The air filter was replaced with a new one to improve indoor air quality and system efficiency. The thermostat settings were reviewed and calibrated to ensure accurate temperature control. Additionally, the drainage system was inspected to prevent any potential water leakage or mold growth. The fan motor and belts were examined for any signs of wear and lubricated if needed. Finally, the system's electrical connections were inspected for tightness and integrity, ensuring safe and reliabl

Conducted a comprehensive maintenance service on a 4-year-old Bryant heat pump, with a primary focus on its cooling functionality. The maintenance began with a thorough inspection of the outdoor unit, ensuring all components were free from debris and properly secured. The condenser and evaporator coils were cleaned meticulously to remove any accumulated dirt or dust, enhancing heat transfer efficiency. The system's refrigerant levels were checked and adjusted as necessary to ensure optimal performance. The air filter was replaced with a new one to improve indoor air quality and system efficiency. The thermostat settings were reviewed and calibrated to ensure accurate temperature control. Additionally, the drainage system was inspected to prevent any potential water leakage or mold growth. The fan motor and belts were examined for any signs of wear and lubricated if needed. Finally, the system's electrical connections were inspected for tightness and integrity, ensuring safe and reliabl

Hanging return ductwork for proper airflow.

Completed a comprehensive maintenance service on a Champion AC unit. The process began with a thorough inspection of the entire system, including the condenser, evaporator coils, and air filters. The air filters were replaced to ensure optimal airflow and efficiency. The condenser and evaporator coils were cleaned to remove any accumulated dirt and debris, enhancing heat exchange efficiency. The system's electrical components were checked for any signs of wear or damage. Lubrication was applied to the motor bearings to ensure smooth operation. Refrigerant levels were verified and topped off as necessary. The thermostat was calibrated to ensure accurate temperature control. Finally, the system was tested to confirm it was operating at peak performance. All work was completed to manufacturer specifications.

Checking airflow and temperatures on a Bryant natural gas furnace and ac system

Upon inspection, the condensation drain was found to be obstructed, preventing proper water drainage from the system. I carefully accessed the drain line, using specialized tools to remove the blockage. The clog was composed of accumulated debris and mineral deposits. I meticulously cleaned the line, ensuring all contaminants were eliminated. After confirming the drain was clear, I flushed it with water to verify unobstructed flow. The system was then restarted to ensure it operated efficiently. The client was informed of the issue and advised on preventive maintenance to avoid future clogs. The job was completed successfully, restoring the system's functionality.

I replaced the customer's water heater, carefully installing it in the crawl space. This involved removing the old unit and ensuring the new one was securely positioned. Next, I repiped the hall bathroom, starting from the shoe area and connecting it to the main line. This required precise measurements and careful handling to ensure a leak-free connection. Throughout the process, I maintained a clean and organized workspace, ensuring all connections were secure and compliant with safety standards. The job was completed efficiently, restoring proper functionality to the water system.

Mini Split service.