HVAC & Plumbing Excellence in Cache, OK

Conducted a comprehensive maintenance service on a heat pump system, with a primary focus on the cooling function. This involved a thorough inspection of the system's components, including the evaporator and condenser coils, to ensure optimal performance. The maintenance included cleaning the coils to remove any accumulated dirt and debris, which enhances efficiency and extends the system's lifespan. Additionally, the refrigerant levels were checked and adjusted as necessary to maintain proper cooling capacity. The system's thermostat and control settings were calibrated to ensure accurate temperature regulation. Lubrication of moving parts was performed to reduce wear and tear, and the system's electrical connections were inspected for any signs of wear or damage. Finally, a performance test was conducted to verify that the cooling function was operating efficiently and effectively.

Conducted a comprehensive maintenance service on a dual fuel Bryant system, ensuring optimal performance and efficiency. The process began with a thorough inspection of the system's components, including the furnace, air handler, and thermostat. I meticulously checked for any signs of wear, corrosion, or damage. Next, I cleaned and replaced air filters to enhance air quality and system efficiency. The heat exchanger was inspected for cracks or leaks, and necessary repairs were made. I also calibrated the thermostat settings to ensure accurate temperature control. Additionally, I lubricated moving parts and checked electrical connections for proper functionality. Finally, I tested the system to confir

A Carrier heat pump system was assessed for performance issues. Upon inspection, the 5/30 mfd capacitor was identified as the root cause of the malfunction. The old capacitor was carefully removed, and a new 5/30 mfd capacitor was installed in its place. Electrical connections were checked for proper contact and tightened as needed. The system was then tested to ensure the new capacitor was functioning correctly and the heat pump was operating efficiently. Safety protocols were followed throughout the process to guarantee a secure working environment. The system was restored to optimal performance, enhancing overall energy efficiency.

A malfunctioning water tank was identified as the root cause of an issue affecting the system's performance. I began by safely shutting down the system to ensure no further damage occurred. The old, faulty water tank was carefully removed, and a new, high-quality replacement was prepared for installation. I meticulously checked all connections and fittings to ensure they were clean and free of debris. The new tank was then securely installed, and all connections were double-checked for tightness and proper alignment. After installation, I conducted a thorough system check to confirm that the new tank was functioning correctly and that the system was operating as intended. The system was then safely restarted, and performance was verified to be optimal.

A Carrier HVAC system was experiencing issues with its Nest thermostat, leading to inconsistent temperature control and user dissatisfaction. Upon inspection, it was discovered that the thermostat was not communicating effectively with the system. I began by checking the wiring connections to ensure they were secure and correctly configured. Next, I performed a factory reset on the Nest thermostat to eliminate any potential software glitches. After confirming the wiring and reset, I tested the system's response to thermostat commands. The problem persisted, so I delved deeper into the system's control board and communication protocols. I found that the communication between the thermostat and the system was disrupted. By updating the system's firmware and reconfiguring the communication settings, I restored full functionality. The Nest thermostat now accurately controls the system, providing reliable temperature management and user satisfaction.

Recently, I meticulously cleaned the condensate drain on an 8-month-old Carrier AC heat pump system. This involved inspecting the drain line for any blockages or debris that could impede proper drainage. I carefully removed any obstructions, ensuring the line was clear and unobstructed. Next, I flushed the drain with a mixture of water and a specialized cleaning solution to eliminate any remaining buildup. This process helped maintain the system's efficiency and prevent potential water damage. I also checked the surrounding area for any signs of moisture or leaks, ensuring everything was in optimal condition. The system was then tested to confirm that the drainage was functioning correctly and efficiently. This thorough maintenance contributed to the longevity and performance of the heat pump system.

Installed a new 3-ton Amana air conditioner, evaporator coil, and 96% high-efficiency furnace. Also installed a new WiFi thermostat to improve system control and customer convenience.

We completed a comprehensive HVAC system replacement, transitioning from a heat pump air handler to a high-efficiency 96% gas furnace. This involved installing a new AC coil and condenser to ensure optimal cooling performance. Additionally, we installed new plenums to enhance air distribution and an advanced air scrubber to improve indoor air quality. The entire system was meticulously designed and installed to provide reliable heating and cooling while maximizing energy efficiency. The project was executed with precision, ensuring a seamless transition and improved comfort for the space.

I began by turning off the main water supply to ensure safety. The existing water heater tank was carefully drained and disconnected from the plumbing system. After removing the old tank, I installed a new tankless water heater, ensuring all connections were secure and leak-free. I then tested the new system to confirm it was functioning correctly and providing hot water efficiently. The old tank was disposed of responsibly. Throughout the process, I maintained a clean and organized workspace, ensuring all tools and materials were properly stored. The job was completed to the client's satisfaction, with the new tankless water heater providing reliable hot water on demand.

Conducted a comprehensive maintenance service on five distinct HVAC systems. The maintenance included two Lennox heat pumps, where we meticulously inspected and cleaned the coils, checked refrigerant levels, and ensured optimal airflow. For the Amana heat pump, we performed similar tasks, paying close attention to the system's unique components. Additionally, we serviced two Carrier systems, focusing on the air conditioning units. This involved cleaning and inspecting the evaporator and condenser coils, checking electrical connections, and ensuring the thermostat was functioning correctly. All systems were tested for efficiency and reliability, and any minor issues were addressed promptly to ensure peak performance.

Roof flashing leaking on mobile home system.

A 4-ton heat pump and air handler were installed, ensuring optimal heating and cooling efficiency. Local return vents were upsized to enhance airflow and improve system performance. An air scrubber was added to the system, effectively filtering out contaminants and allergens, thereby imp

A recent project involved a comprehensive evaluation and optimization of the existing ductwork system to ensure efficient airflow throughout the building. This included a meticulous inspection of all duct connections, joints, and transitions to identify any potential leaks or obstructions. Each segment was assessed for proper sizing and material suitability to guarantee optimal performance. Additionally, airflow measurements were taken at various points to confirm balanced distribution. Necessary adjustments were made to enhance efficiency, including sealing leaks, replacing damaged sections, and optimizing the layout to reduce resistance. The final result was a ductwork system that delivers consistent, high-quality airflow, contributing to improved indoor air quality and energy efficiency.

Condenser Coil cleaning on an HVAC tuneup in Cache, Oklahoma!

Hvac Tune Up on a 3.5 ton Goodman heat pump and Airhandler!

HVAC service!

Patching refrigerant leak found on Txv pressure line.

Refrigerant leak on Armstrong Heat Pump system.

Upon inspection, the existing water heater was found to be severely rusted and leaking, posing a risk to the property and its occupants. The first step was to turn off the water supply to prevent any further damage. The old, corroded water heater was carefully removed, ensuring no water or debris was spilled. A new, high-quality water heater was then installed, complete with all necessary connections and safety checks. The system was tested to ensure it was functioning correctly and efficiently. The old heater was disposed of responsibly, and the area was cleaned up. This replacement not only resolved the leak but also improved the efficiency and reliability of the water heating system.

We assessed the existing water heater and identified significant rust and leaks. The old unit was carefully removed, ensuring minimal disruption. A new, high-efficiency water heater was selected based on the client's needs and preferences. The new unit was installed with precision, ensuring all connections were secure and leak-proof. We conducted thorough testing to confirm the new heater's functionality and efficiency. The old heater was disposed of responsibly. The job was completed on time, and the client was satisfied with the improved performance and reliability of the new water heater.